Facial washing and noodle integrated machine

Instructions for using the facial washing machine:

1. Operators should stick to their work positions and do not overfeed or operate under overload. Observe the operation of the machine at any time.

2. The gearbox should be filled with No. 40 mechanical oil, which should not be excessive. The oil should be drained within one week of initial use, cleaned with diesel, and replaced with new oil. Afterwards, the new oil should be replaced every six months. Fill the outer spherical surface of the bearing with oil twice per shift.

3. The rotating parts of the machine should not be in personal contact to avoid accidents.

4. When cleaning and repairing the machine, a sign should be hung on the main gate to avoid unexpected accidents.

5. Electrical equipment (including wires) should be regularly checked for insulation and should comply with corresponding standards.

Main parameters of the machine:

Model size (mm), rotational speed (r/min), feeding amount (kg), power (kw)

SLM500 3250 × one thousand and two hundred × 1150 42 500 11

Model reducer with motor bearing framework oil seal O-ring

SLM500 BWD3-35-5.5KW (dual reducer) UCFC212 70 × one hundred × 12 external φ eighty × five point seven

The working principle of the integrated facial washing machine:

The structure of the face washing integrated machine is inside a double U-shaped casing, equipped with two opposite rotating spiral propulsion mixers, with a speed of 40 rpm and adjustable propulsion direction. When discharging the slurry, the gluten is pushed to the rear. The slurry has three layers of outlets, which are discharged from top to bottom in sequence. After the washing is completed and the slurry is discharged, the screw shaft is activated to push the gluten out of the casing end face and push out the wet gluten. The large face washing machine is composed of a shell, double spiral shaft, discharge port, discharge port, transmission system control cabinet, motor, etc. The discharge port is controlled by a butterfly valve with one button to reduce the discharge of broken gluten. The discharge port is located in the middle and lower part, and can be automatically discharged after opening the door, saving manpower.